|
Mosquito Killing System Ease of Installation
|
|
Residential Installation
The Mosquito Killing System can be easily mounted using brackets (included) on most walls; or placed on any flat spot in your yard using the stand.
|
|
|
|
|
|
Commercial Installation
|
| 1. Mount bracket with provided hardware. |
2. Secure unit to mounted bracket. |
|
|
|
|
3. Install padlock for additional
security if desired. |
4. Connect the MKS unit to power source. |
|
|
|
|
| 5. Route CO2 hose and attach regulator. |
6. Or wall mount the MKS unit as shown. |
|
|
|
Here are a few tips:
- Please read your owners manual carefully.
- Remember to mail in your warranty card.
- Place your unit 20 ft. – 40 ft. away from your outdoor living area.
- Your unit is effective for up to an acre radius.
- Placement is best where mosquitoes "roost" – tall grass, bushes, shrubs, garden fringes, still lying water etc.
- Optimal mounting height if you are not using the stand is 3 ft. – 6 ft.
- This unit is UL approved and may be used with an outdoor extension cord.
- Your unit is equipped with a photocell sensor. When the cap is off and your unit is plugged in your unit will come on at dusk and go off at dawn. When the cap is on and your unit is plugged in, it will operate continuously.
- A 20lb. CO2 cylinder will last approximately 18-23 days.
- Be mindful that your CO2 gauge will fluctuate with weather temperatures. Higher temperatures may indicate higher pressure; colder temperatures may indicate lower pressure. When the needle is in the red area the tank is almost empty and needs to be replaced.
- CO2 cylinders can be purchased and/or refilled at any welding supply company or any beverage supply company.
|
